出口合同范本【英文版】

出口合同范本【英文版】1

　　賣方(Seller) :________________________

　　地址(Address) :_______________________

　　電話(Tel) :__________傳真(Fax) :__________

　　電子郵箱(E-mail) :_____________________

　　買方(Buyer) : ______________________

　　地址(Address) : ______________________

　　電話(Tel) :：_________傳真(Fax) :_____________

　　電子郵箱(E-mail) : ______________________

　　買賣雙方經協商同意按下列條款成交：

　　The undersigned Seller and Buyer have agreed to close the following transactions according to the terms and conditions set forth as below:

　　1. 貨物名稱、規格和質量 (Name, Specifications and Quality of Commodity):

　　2. 數量(Quantity)：

　　3. 單價及價格條款 (Unit Price and Terms of Delivery) :：

　　(除非另有規定，"FOB"、"CFR"和" CIF"均應依照國際商會制定的《20xx年國際貿易術語解釋通則》(INCOTERMS 20xx)辦理。)

　　The terms FOB,CFR,or CIF shall be subject to the International Rules for the Interpretation of Trade Terms (INCOTERMS 20xx) provided by International Chamber of Commerce (ICC) unless otherwise stipulated herein.)

　　4. 總價 (Total Amount):

　　5. 允許溢短裝(More or Less): ___%。

　　6. 裝運期限(Time of Shipment):

　　收到可以轉船及分批裝運之信用證___天內裝運。

　　Within _____ days after receipt of L/C allowing transhipment and partial shipment.

　　7. 付款條件(Terms of Payment)：

　　買方須于____ 前將保兌的、不可撤銷的、可轉讓的、可分割的即期付款信用證開到賣方，該信用證的有效期延至裝運期后_____天在中國到期，并必 須注明允許分批裝運和轉船。

　　By Confirmed, Irrevocable, Transferable and Divisible L/C to be available by sight draft to reach the Seller before ______ and to remain valid for negotiation in China until ______after the Time of Shipment. The L/C must specify that transshipment and partial shipments are allowed.

　　買方未在規定的時間內開出信用證，賣方有權發出通知取消本合同，或接受 買方對本合同未執行的全部或部份，或?qū)σ虼嗽馐艿膿p失提出索賠。

　　The Buyer shall establish a Letter of Credit before the above-stipulated time, failing which, the Seller shall have the right to rescind this Contract upon the arrival of the notice at Buyer or to accept whole or part of this Contract non fulfilled by the Buyer, or to lodge a claim for the direct losses sustained, if any.

　　8. 包裝(Packing)：

　　9. 保險(Insurance)：

　　按發票金額的___%投保_____險，由____負責投保。

　　Covering _____ Risks for______110% of Invoice Value to be effected by the ____________.

　　10. 品質/數量異議 (Quality/Quantity discrepancy)：

　　如買方提出索賠，凡屬品質異議須于貨到目的口岸之日起30天內提出，凡屬 數量異議須于貨到目的口岸之日起15天內提出，對所裝貨物所提任何異議于保險 公司、輪船公司、其他有關運輸機構或郵遞機構所負責者，賣方不負任何責任。

　　In case of quality discrepancy, claim should be filed by the Buyer within 30 days after the arrival of the goods at port of destination, while for quantity discrepancy, claim should be filed by the Buyer within 15 days after the arrival of the goods at port of destination. It is understood that the Seller shall not be liable for any discrepancy of the goods shipped due to causes for which the Insurance Company, Shipping Company, other Transportation Organization /or Post Office are liable.

　　11. 由于發生人力不可抗拒的原因，致使本合約不能履行，部分或全部商品 延誤交貨，賣方概不負責。本合同所指的不可抗力系指不可干預、不能避免且不 能克服的`客觀情況。

　　The Seller shall not be held responsible for failure or delay in delivery of the entire lot or a portion of the goods under this Sales Contract in consequence of any Force Majeure incidents which might occur. Force Majeure as referred to in this contract means unforeseeable, unavoidable and insurmountable objective conditions.

　　12. 仲裁(Arbitration)：

　　因凡本合同引起的或與本合同有關的任何爭議，如果協商不能解決，應提 交中國國際經濟貿易仲裁委員會深圳分會。按照申請仲裁時該會當時施行的仲裁 規則進行仲裁。仲裁裁決是終局的，對雙方均有約束力。

　　Any dispute arising from or in connection with the Sales Contract shall be settled through friendly negotiation. In case no settlement can be reached, the dispute shall then be submitted to China International Economic and Trade Arbitration Commission (CIETAC) ,Shenzhe Commission for arbitration in accordance with its rules in effect at the time of applying for arbitration. The arbitral award is final and binding upon both parties.

　　13. 通知(Notices)：

　　所有通知用___文寫成，并按照如下地址用傳真/電子郵件/快件送達給各方。如果地址有變更，一方應在變更后___日內書面通知另一方。

　　All notice shall be written in _____ and served to both parties by fax/e-mail /courier according to the following addresses. If any changes of the addresses occur, one party shall inform the other party of the change of address within ____ days after the change.

　　14. 本合同為中英文兩種文本，兩種文本具有同等效力。本合同一式 _____ 份。自雙方簽字(蓋章)之日起生效。

　　This Contract is executed in two counterparts each in Chinese and English, each of which shall be deemed equally authentic. This Contract is in _____ copies effective since being signed/sealed by both parties.

　　The Seller: 　　　　　　The Buyer:

出口合同范本【英文版】2

　　contract for equipment sales and technology licensing

　　contract no. ____________________

　　this contract (hereinafter referred to as the “contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at _________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “buyer”), and ____________________, a company incorporated and existing under the laws of the people’s republic of china with its registered address at _________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “seller”).

　　whereas, the buyer desires to engage the seller to provide the equipment, related design, technical documentation, technical service and technical training and to obtain from the seller a license of patent and/or know-how in relation to the erection, test run, commissioning, performance test，operation and maintenance for the equipment, as well as manufacture of the contract products. now it is hereby mutually agreed as follows:

　　article 1 definitions

　　1.1 “acceptance ”means the buyer accepted the equipment in accordance with article 11.5.

　　1.2 “commissioning” means the operation of the equipment in accordance with article 11.4 for the purpose of carrying out performance test.

　　1.3 “contract” means this contract signed by and between the buyer and the seller, including appendices attached which shall form an integral part of this contract.

　　1.4 “contract products” refers to all types of the products manufactured with patent and/or know-how under the contract, details of which are specified in appendix 1.

　　1.5 “destination airport” refers to _____________airport.

　　1.6 “effective date of the contract” means the date when the contract enters into force upon fulfillment of all the conditions stated in article 18.1.

　　1.7 “equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the seller as listed in appendix 3.

　　1.8 “erection” means placing the equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

　　1.9 “improvement” refers to new findings and/or modifications made in the validity period of the contract by either party on patent and/or know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

【出口合同英文版】相關文章：

出口在低處作文09-09

關于出口商品購貨協議05-28

對曼德拉的評價英文版10-20

英文版的個人介紹08-23

打招呼用語英文版03-08

小紅帽故事英文版06-03

愛要說出口作文07-30

進出口貨運代理費用結算協議10-07

nike公司簡介英文版04-16